QoS Commands

Example

The following example applies the DSCP Mutation map to system DSCP trusted ports.

Console(config)# qos dscp-mutation

qos map dscp-mutation

The qos map dscp-mutationGlobal Configuration mode command modifies the DSCP to DSCP mutation map. To return to the default DSCP to DSCP mutation map, use the no form of this command.

Syntax

qos map dscp-mutation in-dscpto out-dscp

no qos map dscp-mutation

Parameters

in-dscp— Specifies up to 8 DSCP values separated by spaces. (Range: 0-63)

out-dscp— Specifies up to 8 DSCP values separated by spaces. (Range: 0-63)

Default Configuration

The default map is the Null map, which means that each incoming DSCP value is mapped to the same DSCP value.

Command Mode

Global Configuration mode.

User Guidelines

This is the only map that is not globally configured. it is possible to have several maps and assign each one to different ports.

Example

The following example changes DSCP values 1, 2, 4, 5 and 6 to DSCP mutation map value 63.

Console config)# qos map dscp-mutation1 2 4 5 6 to 63

196Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

Page 212
Image 212
Intel SBCEGBESW10 CLI manual Qos map dscp-mutation