Intel SBCEGBESW10 CLI manual Port security mode, No port security

Address Table Commands

no port security

Parameters

•forward — Forwards packets with unlearned source addresses, but does not learn the address.

•discard — Discards packets with unlearned source addresses. This is the default if no option is indicated.

•discard-shutdown — Discards packets with unlearned source addresses. The port is also shut down.

•seconds — Sends SNMP traps and defines the minimum amount of time in seconds between consecutive traps. (Range: 1-1000000)Default Configuration

This setting is disabled.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

In this example, port 1 forwards all packets without learning addresses of packets from unknown sources and sends traps every 100 seconds if a packet with an unknown source address is received.

Console(config)# interface ethernet ext.1

Console(config-if)#port security forward trap 100

port security mode

The port security mode Interface Configuration mode command configures the port security mode. To restore the default configuration, use the no form of this command.

Syntax

port security mode {lock mac-addresses}

no port security mode

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 29