Intel SBCEGBESW10 CLI manual Spanning-tree bpdu, Default setting is flooding

Spanning-Tree Commands

Example

The following example sets the default path cost method to long.

Console(config)# spanning-tree pathcost method long

spanning-tree bpdu

The spanning-tree bpdu Global Configuration mode command defines BPDU handling when the spanning tree is disabled globally or on a single interface. To restore the default configuration, use the no form of this command.

Syntax

spanning-tree bpdu {filtering flooding}

no spanning-tree bpdu

Parameters

•filtering — Filter BPDU packets when the spanning tree is disabled on an interface.

•flooding — Flood BPDU packets when the spanning tree is disabled on an interface.

Default Configuration

The default setting is flooding.

Command Modes

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example defines BPDU packet flooding when the spanning-tree is disabled on an interface.

Console(config)# spanning-tree bpdu flooding

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 269