Intel SBCEGBESW10 CLI manual Radius-server key key-string No radius-server key

RADIUS Commands

The port number for authentication requests is 1812.

The usage type is all.

Command Mode

Global Configuration mode

User Guidelines

To specify multiple hosts, multiple radius-server host commands can be used.

If no host-specific timeout, retries, deadtime or key-string values are specified, global values apply to each RADIUS server host.

The address type of the source parameter must be the same as the ip-addressparameter.

Example

The following example specifies a RADIUS server host with IP address 192.168.10.1, authentication request port number 20 and a 20-second timeout period.

Console(config)# radius-server host 192.168.10.1 auth-port 20 timeout 20

radius-server key

The radius-server key Global Configuration mode command sets the authentication and encryption key for all RADIUS communications between the device and the RADIUS daemon. To restore the default configuration, use the no form of this command.

Syntax

radius-server key [key-string]

no radius-server key

Parameters

•key-string— Specifies the authentication and encryption key for all RADIUS communications between the device and the RADIUS server. This key must match the encryption used on the RADIUS daemon.

(Range: 0-128 characters)

216Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide