Intel SBCEGBESW10 CLI manual Ip http authentication, There are no user guidelines for this command

AAA Commands

Parameters

•default — Uses the default list created with the aaa authentication enable command.

•list-name— Uses the indicated list created with the aaa authentication enable command.

Default Configuration

Uses the default set with the aaa authentication enable command.

Command Mode

Line Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example specifies the default authentication method when accessing a higher privilege level from a Telnet.

Console(config)# line console

Console(config-line)#enable authentication default

ip http authentication

The ip http authentication Global Configuration mode command specifies authentication methods for HTTP server users. To restore the default configuration, use the no form of this command.

Syntax

ip http authentication method1 [method2...]

no ip http authentication

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 13