Intel SBCEGBESW1 manual Show bridge address-table static, Console# show bridge address-table

Address Table Commands

Command Mode

Privileged EXEC mode

User Guidelines

Internal usage VLANs (VLANs that are automatically allocated on ports with a defined Layer 3 interface) are presented in the VLAN column by a port number and not by a

VLAN ID.

"Special" MAC addresses that were not statically defined or dynamically learned are displayed in the MAC address table. This includes, for example, MAC addresses defined in ACLS.

Example

In this example, all classes of entries in the bridge-forwarding database are displayed.

Console# show bridge address-table
Aging time is 300 sec
interface	mac address	Port	Type
---------	--------------	----	-------
1	00:60:70:4C:73:FF	5	dynamic
1	00:60:70:8C:73:FF	5	dynamic
200	00:10:0D:48:37:FF	5	static

show bridge address-table static

The show bridge address-table static Privileged EXEC mode command displays statically created entries in the bridge-forwarding database.

Syntax

show bridge address-table static [vlan vlan] [ethernet interface port-channel port- channel-number]

Parameters

•vlan — Specifies a valid VLAN, such as VLAN 1.

•interface — A valid Ethernet port.

32 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide