Intel SBCEGBESW10 CLI Spanning-tree priority, Forward-Time 1 = Max-Age Max-Age = 2*Hello-Time +

Spanning-Tree Commands

2*(Forward-Time - 1) >= Max-Age

Max-Age >= 2*(Hello-Time + 1)

Example

The following example configures the spanning tree bridge maximum-age to 10 seconds.

Console(config)# spanning-tree max-age 10

spanning-tree priority

The spanning-tree priority Global Configuration mode command configures the spanning tree priority of the device. The priority value is used to determine which bridge is elected as the root bridge. To restore the default configuration, use the no form of this command.

Syntax

spanning-tree priority priority

no spanning-tree priority

Parameters

•priority — Priority of the bridge. (Range: 0-61440 in steps of 4096)

Default Configuration

The default bridge priority for IEEE Spanning Tree Protocol (STP) is 32768.

Command Modes

Global Configuration mode

User Guidelines

The bridge with the lowest priority is elected as the root bridge.

Example

The following example configures spanning tree priority to 12288.

Console(config)# spanning-tree priority 12288

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 263