Intel SBCEGBESW1 manual Bridge multicast filtering, Consoleconfig# bridge multicast filtering

Address Table Commands

Example

The following example adds a permanent static MAC-layer station source address 3aa2.64b3.a245 on port 1 to the bridge table.

Console(config)# interface vlan 2

Console(config-if)# bridge address 3aa2.64b3.a245 ethernet ext.1 permanent

bridge multicast filtering

The bridge multicast filtering Global Configuration mode command enables filtering multicast addresses. To disable filtering multicast addresses, use the no form of this command.

Syntax

•bridge multicast filtering

•no bridge multicast filtering

Default Configuration

Filtering multicast addresses is disabled. All multicast addresses are flooded to all ports.

Command Mode

Global Configuration mode

User Guidelines

If multicast devices exist on the VLAN, do not change the unregistered multicast addresses state to drop on the switch ports.

If multicast devices exist on the VLAN and IGMP-snooping is not enabled, the bridge multicast forward-all command should be used to enable forwarding all multicast packets to the multicast switches.

Example

In the folowing example, bridge multicast filtering is enabled.

Console(config)# bridge multicast filtering

22 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide