Intel SBCEGBESW10 CLI manual Snmp-server group, No view entry exists

SNMP Commands

•oid-tree— Specifies the object identifier of the ASN.1 subtree to be included or excluded from the view. To identify the subtree, specify a text string consisting of numbers, such as 1.3.6.2.4, or a word, such as system. Replace a single subidentifier with the asterisk (*) wildcard to specify a subtree family; for example 1.3.*.4.

•included — Indicates that the view type is included.

•excluded — Indicates that the view type is excluded.

Default Configuration

No view entry exists.

Command Mode

Global Configuration mode

User Guidelines

This command can be entered multiple times for the same view record.

The number of views is limited to 64.

No check is made to determine that a MIB node corresponds to the "starting portion" of the OID until the first wildcard.

Example

The following example creates a view that includes all objects in the MIB-II system group except for sysServices (System 7) and all objects for interface 1 in the MIB-II interface group.

Console(config)# snmp-server view user-view system included

Console(config)# snmp-server view user-view system.7 excluded

Console(config)# snmp-server view user-view ifEntry.*.1 included

snmp-server group

The snmp-server group Global Configuration mode command configures a new Simple Management Protocol (SNMP) group or a table that maps SNMP users to SNMP views. To remove a specified SNMP group, use the no form of this command.

Syntax

snmp-server group groupname {v1 v2 v3 {noauth auth priv} [notify notifyview]} [read readview] [write writeview]

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 239