QoS Commands

Syntax

qos map policed-dscp dscp-listto dscp-mark-down

no qos map policed-dscp

Parameters

dscp- list — Specifies up to 8 DSCP values separated by a space. (Range: 0-63)

dscp-mark-down— Specifies the DSCP value to mark down. (Range: 0-63)

Default Configuration

The default map is the Null map, which means that each incoming DSCP value is mapped to the same DSCP value.

Command Mode

Global Configuration mode.

User Guidelines

DSCP values 3,11,19… cannot be remapped to other values.

·Example

The following example marks down incoming DSCP value 3 as DSCP value 43 on the policed-DSCP map.

Console(config)# qos map policed-dscp 3 to 43

Reserved DSCP. DSCP 3 was not configured.

qos map dscp-queue

The qos map dscp-queueGlobal Configuration mode command modifies the DSCP to CoS map. To return to the default map, use the no form of this command.

Syntax

qos map dscp-queue dscp-listto queue-id

no qos map dscp-queue

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

191

Page 207
Image 207
Intel SBCEGBESW10 CLI manual Qos map dscp-queue, Dscp values 3,11,19… cannot be remapped to other values