Intel SBCEGBESW10 CLI manual Default port is the Telnet port decimal23 on the host

System Management Commands

H	Host unreachable.
N	Network unreachable.
P	Protocol unreachable.
Q	Source quench.
R	Fragment reassembly time exceeded.
S	Source route failed.
U	Port unreachable.

telnet

The telnet User EXEC mode command enables logging on to a host that supports Telnet.

Syntax

telnet {ip-address hostname} [port] [keyword1 ]

Parameters

•ip-address — IP address of the destination host.

•hostname — Host name of the destination host. (Range: 1-158 characters)

•port — A decimal TCP port number, or one of the keywords listed in the Ports table in the User Guidelines.

•keyword — One or more keywords listed in the Keywords table in the User Guidelines.

Default Configuration

The default port is the Telnet port (decimal23) on the host.

Command Mode

User EXEC mode

User Guidelines

Telnet software supports special Telnet commands in the form of Telnet sequences that map generic terminal control functions to operating system-specific functions. To enter a Telnet sequence, press the escape sequence keys (Ctrl-shift-6) followed by a Telnet command character.

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 325