Guide to Printing Using Xerox Production Print Services | Using XDS |
Adding a printer
You can set up a customized list of printers that you use regularly. To start a printer list or add to an existing one, follow these steps:
1.Select [Connections] on the XDS window. The Printer Connections window is displayed.
2.On the Printer Connections window, select [Add New...]. The Add New Printer window is displayed.
3.On the Add New Printer window, select the appropriate network type for your environment.
Select [No connection] if this printer connection will be used only for creating or modifying job tickets. You will not be able to print to this printer connection.
4.Continue following the instructions in the Add New Printer wizard to add a new printer to the Printer Connections list.
NOTE: The network connection dialog that is displayed depends on the type of network you selected. Refer to your network documentation for further information.
NOTE: If a message appears informing you that the selected queue is not a Xerox print queue, contact your system administrator.
Setting the default printer
After you create a list of customized printer queues, you may specify one of them as a default printer queue. The default queue is then selected automatically whenever you enter the XDS software.
1.On the XDS window, select [Connections]. The Printer Connections window is displayed.
2.Select the name of the printer queue in the Printer list box.
3.Select [Set Default]. The default printer queue name remains selected when you enter the XDS software.
4.Select [OK] to return to the XDS window.
