Using the XDS Plus software | Guide to Printing Using Xerox Production Print Services |
XDS Plus printing process
1.Open the XDS Plus window.
Refer to “Accessing the XDS Plus software,” in the previous section.
2.Select a print queue.
Refer to “Selecting a printer and queue.”
3.On the Files tab window, perform the following:
a.Select a document file to print. Refer to “Selecting a file to print.”
b.Select a job ticket file, if you do not intend to create a new ticket for this job.
c.Select the job destination (print, save, or print and save). Refer to “Selecting printing or saving.”
4.Set up the print job and job ticket parameters as required.
Select the following tabs to access and set up the various job parameters:
• Job Setup
•Output
•Image Adjustment
•Color
•Special Pages
Refer to “Setting up a print job.”
5.If desired, record job notes by entering them on the Job Notes tab window.
6.Send the document file to the print queue. Refer to “Submitting a print job.”
NOTE: When you are performing the setup procedures, you can use <Tab> to move the cursor to the next button or text box in every window. Holding down <Shift> while pressing <Tab> causes the cursor to move backward through the items on the window.
