Guide to Printing Using Xerox Production Print Services | Job ticket options |
3.Select [OK] to save your changes and to return to the Color dialog box.
If you want to return to the Color dialog box without saving any changes, select [Cancel].
Setting highlight color parameters
On printers that support highlight color, the Highlight Color Setup dialog box enables you to specify the highlight color, the mismatch action that will be taken by the system if the preferred color is not installed at the printer, the extraction color, and the rendering algorithm for printing the colors specified in the job.
Specifying the highlight color
To specify the highlight color that will be used to print a job, select the desired color from the Highlight Color
If the job contains specifications for full color, the system provides a conversion of full color documents to highlight color by mapping each color to a shade or a tint of the selected highlight color.
Specifying the mismatch action
From the Mismatch action
The options are:
•[Printer Default]
•[Use Loaded Color]: The document is printed using the color that is installed in the printer. This selection is appropriate when the actual highlight color is not important.
•[Hold Job]: The document is held at the printer until the specified color is installed.
•[Cancel Job]: The document is not printed and the print job is cancelled if the specified color is not installed in the printer.
Specifying the extraction color
When a highlight color printing system receives a color job, it prints it in whatever color of ink is loaded in the printer, using solid color and a variety of shades (color plus black) and tints (color plus white).
