Using the XDS Plus software | Guide to Printing Using Xerox Production Print Services |
2.In the [Printers] or [Queues] section on the Change Printer window,
3.When you are finished viewing the information, select [Close] to close the Properties window.
NOTE: You can also access individual printer and queue information from the Printers and Queues lists on the Print Monitor tab window, which you display by selecting [Administration] on the XDS Plus window.
Selecting a printer and queue
Follow these steps to select a printer and print queue for your job:
1.On the XDS Plus window, select [Change Printer] to open the Change Printer window.
2.If the queue that you want is not displayed in the [Queues] section, select [Show All Queues].
3.In the [Queues] section, select the name of the queue to which you want to send the job.
The Printers section displays the name of the printer that is associated with the queue that you selected.
4.Select [Set Print Path] to confirm your selection and close the Change Printer window.
NOTE: This can also be performed using the Printer menu and select [Change Queue].
Printer and queue setup
NOTE: The printer discovery file must be set up on your workstation before setting up the printer and queue. If the printer discovery file was not added to your workstation during installation, select the Preferences option from the Options menu and add the printer discovery file.
NOTE: Refer to the Installation Guide for the procedure to create a printer discovery file.
