Guide to Printing Using Xerox Production Print Services Printing a job using the DocuSP web interface
•If you want to confirm your selections without closing the Expert Color Settings window, select [Apply].
•Select [OK] to confirm your selections and close the Expert Color Settings window.
•To close the window without making any changes, select [Cancel].
The following sections describe the parameters that are available on the Expert Color Settings window.
Specifying source color profiles
The [Source Color] section of the Expert Color Settings window enables you to accurately identify the correct source for color in the document by selecting an Images Profile and a Graphics and Text Profile for the color spaces in the following fields:
•[RGB Color Space] (red/green/blue)
•[CMYK Color Space] (cyan/magenta/yellow/black)
•[Grayscale Color Space] (monochrome)
From the Images Profile and the Text and Graphics Profile pull- down menus in the desired color space field, select one of the source profiles that have been loaded onto the printing system at the controller window. If you want to use the default profile that was set at the printer controller, select the [Printer Default] check box.
Specifying output color parameters
The [Output Color] section of the Expert Color Settings window contains fields in which you can make advanced level specifications that will modify colors in the printed output. In each of the following fields you can select an option from the pull- down menu, or select the [Printer Default] check box if you want to use the profiles that were set at the printer controller.
•[Destination Profile]: Lets you specify an International Color Consortium [ICC] color profile for the front, back, or both sides of the printed page. This profile is used by the decomposer when it converts color data to the appropriate color space for your printer.
