Printing a job using the DocuSP web interface Guide to Printing Using Xerox Production Print Services
7.Set up the remaining job ticket parameters in this section of the Job Submission window as required. Refer to “Setting up a print job.”
8.Specify the job parameters in the [Image Adjustment] section of the Job Submission window as needed. Refer to “Setting up advanced features.”
9.If desired, record job notes by entering them in the fields in the [Job Information] section. Refer to “Entering job information.”
10.Send the document file to the print queue. Refer to “Submitting a print job.”
NOTE: When you are performing the setup procedures, you can use <Tab> to move the cursor to the next button or text box in every window. Holding down <Shift> while pressing <Tab> causes the cursor to move backward through the items on the window.
While the job is printing, you can check the job status by selecting the [Administration] button. Refer to “Checking job, printer, and queue status and messages,” later in this chapter.
Setting up a print job
The web interface Job Submission window enables you to set up your print job by creating or selecting job tickets. This window is divided into two sections:
•Printing section: This stationary section at the top of the Job Submission window contains queue and file selections and the [Print] button.
•Job parameters section: This section contains fields in which you can specify job parameters such as copies, PDL type, and image shift. It also contains a Job Information section in which you can record information such as the job name, sender and recipient names, and the account number.
NOTE: Do not enter job names, sender names, or queue names which total over 140 characters.
NOTE: A queue name, sender name, and job name must contain valid URL characters when using the DocuSP web interface for job submission, job and queue status, and listings.
