Xerox 701P40016 Specifying the stock color, Specifying the stock type, Standard Opaque paper

Job ticket options Guide to Printing Using Xerox Production Print Services

3.If necessary, select the radio button for the desired unit of measure for your stock size. Your options are [in.] (inches) or [mm] (millimeters).

Specifying the stock color

Follow these steps to select the color of the stock:

1.From the Color pop-up menu, select a stock color or [Custom].

2.If you select [Custom], a Custom Selection dialog box opens. Enter the name of the custom color, up to 30 characters, and select [OK] to close the Custom Selection dialog box.

NOTE: If you are using a DocuPrint NPS printer, you may enter a name of up to 27 characters. Do not use spaces when entering the color name.

Specifying the stock type

Follow these steps to select the type of stock that you are defining:

1.From the Type pop-up menu, select the stock type. Depending on your printer, the following options may be available:

•[Standard]: Opaque paper

•[Transparency]: Clear, plastic sheets (8.5 to 9 inches / 213 to 225 mm wide). This option usually may be selected with any stock color; however, on some systems, you may have to select [Clear] for the stock color.

•[Precut Tab]: Paper stock on which tabs are cut in incrementally spaced positions along the length of the sheet, with one tab per sheet.

If you select this option, a Custom Selection dialog box opens. Enter the desired number of tab positions, from 1 to 100, then select [OK] to close the Custom Selection dialog box.

NOTE: An error will occur if 2-sided printing is programmed for pre-cut tabs or drilled pre-cut tabs. Printing on these stocks must only be 1-sided.

•[Fullcut Tab]: Stock on which tabs span the length of one edge of the sheet.

•[Preprinted]: Stock on which a form, logo, etc., has been printed previously.

9-16