Guide to Printing Using Xerox Production Print Services | Job ticket options |
2.In the Covers dialog box, select either [Front and Back Same] or [Front and Back Different] to add both a front and a back cover to the job. Depending on your selection, either the [Front Cover] and [Back Cover] fields or the [Both Covers] field are displayed.
•Select [Front and Back Same] if the paper stock and the sides printed will be the same for both the front and back covers.
•Select [Front and Back Different] when the paper stock or sides printed will be different for the front cover and the back cover.
3.From the
4.If you want to select a different stock ID or specify different properties for the stock number, select the [Stocks...] icon to open the Paper Stocks dialog box.
a. On the Paper Stocks dialog box, select the same stock number from the Stocks menu that you selected on the Covers dialog box.
b. Program the stock for the cover. Refer to “Specifying stocks for the job” and “Specifying stock properties,” earlier in this chapter, for further information.
c. Select [OK] to close the Paper Stocks dialog box and return to the Covers dialog box. Your new stock specifications are displayed in the [Paper Stocks] field on the Covers dialog box.
5.Select the sides of the cover that will be printed. The available options are [None], [Side 1], [Side 2], and [Both Sides].
6.If you selected [Front and Back Different], repeat steps 3 through 5 to program the remaining cover.
7.Select [OK] to save the covers programming and return to the Job Ticket dialog box. The number of covers that you specified (2, in this case) is displayed below the [Covers] icon on the Job Ticket dialog box.
If you want to remove the covers programming, select [Cancel].
