Xerox 701P40016 manual XDS Command Line operating modes, Using Print command mode

Using Command Line Client Guide to Printing Using Xerox Production Print Services

1.Log on to your network.

2.Use the main application called Print. Type Print - <argument>. Additional information about using this application is in the following section.

3.Wait for the XDSCL> prompt to appear on the window. This may take several seconds.

At the XDSCL> prompt, you are now using XDS Command Line in Multiple Command Mode and and may enter job setup and print commands on the command line at this prompt.

XDS Command Line operating modes

You can enter commands in the following mode:

•Print command mode: In this mode, you enter all the specifications for setting up and printing a job as a single command with multiple parameters.

You can key in commands and parameters at the XDSCL prompt on the Java DOS window or the Unix Run window. The command syntax differs for each mode.

NOTE: Unix commands are case-sensitive. Be sure to enter each command exactly as it is represented in this chapter.

Using Print command mode

When operating in single command mode, you provide instructions to XDS Command Line by entering one command. All printing and job setup specifications that you can enter are parameters of that one command. To access, type the following:

Print -<argument.

Print command mode parameters

You can perform the following functions in print command mode.

Accessing XDS Command Line Help: -help and -\?

Displays a list of parameters and arguments that are available in single command mode, and their functions.

6-2