
Using XDS | Guide to Printing Using Xerox Production Print Services |
•Page range ([To] and [From])
•[Job Type]
•[Disposition]
8.Enter the job notes.
9.Define the stocks that you will use for the print job.
10.Select any special features for the job, such as covers, blank inserts, or exception pages
11.Select [OK] to send the document file to the printer.
NOTE: When you are performing the procedures, if you press the <RETURN> or <ENTER> key, the XDS software executes the task that is initiated by the [Default] button in any dialog box.
If you press <Command(Apple)
Using drag and drop to print one or more jobs
You can select one or more jobs, then drag and drop them on the
XDS icon to print.
Before dragging and dropping the job icon, highlight the designated printer icon on the desktop.
NOTE: This should be the default printer.
After the jobs are dropped:
1.The printer type selection dialog box is displayed. Select the printer type on which the jobs will be printed.
2.The Job Ticket dialog box is displayed for the first job that was dropped. Program the ticket for the job, then select [OK].
If more than one job was dropped at the same time, the first job is sent to the printer, and the job ticket dialog is displayed for the next job. The job ticket programming that was selected for the first job is retained for the next job.
Saved job tickets may be accessed and opened for any job that has been dragged and dropped using the procedures that are described in this chapter. When a saved job ticket is used for a job, the programming of the saved ticket is retained for the next job.
A job may be cancelled prior to printing from XDS. The Job Ticket dialog box then opens for the next job in line.