Guide to Printing Using Xerox Production Print Services Printing a job using the DocuSP web interface
When [Printer Default] is selected, the job is printed using the option that was set in one of the categories that are shown in priority order in the following figure.
The figure above illustrates that parameters that are specified as queue overrides at your printing system controller are used as defaults first. If no queue overrides have been specified, parameters on any exception pages are used, and so on.
NOTE: If the [Printer Default] check box is selected, you must deselect it if you want to select any of the other options in the same field.
For information regarding selecting a print queue, refer to “Selecting a Print Queue” found later in this chapter.
Specifying the number of copies
To select the number of copies of your document that will be printed, follow these steps:
1.On the Job Submission window, scroll until the [Quantity] field is visible.
2.In the [Quantity] text box, either enter the number of copies, or select the arrow buttons until the desired number of copies is displayed.
