Guide to Printing Using Xerox Production Print Services | Using the XDS Plus software |
You can also expand either section to fill the work space of the Change Printer window by selecting the small, triangular buttons near the left edge of the splitter bar.
Buttons The Change Printer window contains the following buttons:
•[Show All Printers]: Displays in the Printers section all the printers that have been specified in the printer discovery file (printer.disc) and are currently available.
•[Show All Queues]: Displays in the [Queues] section all queues that have been created at the controller, for all printers that have been specified in the printer discovery file and are currently available.
•[Set Print Path]: Confirms your queue selection and closes the Change Printer window. This button is grayed out unless a queue is selected.
•[Refresh]: Updates and redisplays the Printers and Queues lists.
Viewing printer and queue properties
You can view information about printers and queues in the following ways:
•Select the printer or queue name on the Change Printer window.
–If you select a printer name, the [Queues] section of the Change Printer window displays the queues that are enabled for that printer only.
–If you select a queue name, the [Printers] section of the Change Printer window displays only the printer that contains that queue.
You can select multiple printer or queue names by holding down the <Control> or <Shift> key while selecting the items. If you select more than one printer or queue, the other window displays the queues or printers for all the items that you selected.
•Open the Properties window for the desired queue or printer by following these steps:
1.Select [Change Printer] on the XDS Plus window. The Change Printer window opens.
