Intel SBCEGBESW10 CLI manual Switchport general allowed vlan, VID=1

VLAN Commands

Default Configuration

VID=1.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

The command adds the port as a member in the VLAN. If the port is already a member in the VLAN (not as a native), it should be first removed from the VLAN.

Example

The following example configures VLAN number 123 as the native VLAN when Ethernet port 1 is in trunk mode.

Console(config)# interface ethernet ext.1

Console(config-if)#switchport trunk native vlan 123

switchport general allowed vlan

The switchport general allowed vlan Interface Configuration mode command adds or removes VLANs from a general port.

Syntax

switchport general allowed vlan add vlan-list[tagged untagged]

switchport general allowed vlan remove vlan-list

Parameters

•add vlan-list— Specifies the list of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs.

•remove vlan-list— Specifies the list of VLAN IDs to be removed. Separate nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs.

•tagged — Indicates that the port transmits tagged packets for the VLANs.

•untagged — Indicates that the port transmits untagged packets for the VLANs.

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 363