Intel SBCEGBESW1 Bridge multicast forbidden address, Following example registers the MAC address

Address Table Commands

Example

The following example registers the MAC address:

Console(config)# interface vlan 8

Console(config-if)# bridge multicast address 01:00:5e:02:02:03

The following example registers the MAC address and adds ports statically.

Console(config)# interface vlan 8

Console(config-if)# bridge multicast address 01:00:5e:02:02:03 add ethernet ext.1, ext.2

bridge multicast forbidden address

The bridge multicast forbidden address Interface Configuration (VLAN) mode command forbids adding a specific multicast address to specific ports. Use the no form of this command to restore the default configuration.

Syntax

bridge multicast forbidden address {mac-multicast-address ip-multicast-address} {add remove} {ethernet interface-list port-channel port-channel-number-list}

no bridge multicast forbidden address {mac-multicast-address ip-multicast-address}

Parameters

•add — Adds ports to the group.

•remove — Removes ports from the group.

•mac-multicast-address — A valid MAC multicast address.

•ip- multicast-address — A valid IP multicast address.

•interface-list — Separate nonconsecutive Ethernet ports with a comma and no spaces; hyphen is used to designate a range of ports.

•port-channel-number-list — Separate nonconsecutive valid port-channels with a comma and no spaces; a hyphen is used to designate a range of port-channels.

Default Configuration

No forbidden addresses are defined.

24 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide