Configuration and Image File Commands

Parameters

url — The location URL or reserved keyword of the file to be deleted. (Range: 1-160 characters)

The following table displays keywords and URL prefixes:

Keyword

Source or Destination

 

 

flash:

Source or destination URL for flash memory. It’s the default in case a URL is specified

 

without a prefix.

 

 

startup-config

Represents the startup configuration file.

 

 

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

*.sys, *.prv, image-1 and image-2 files cannot be deleted.

Example

The following example deletes the file called ‘test’ from the flash memory.

Console# delete flash:test

Delete flash:test? [confirm]

boot system

The boot system Privileged EXEC mode command specifies the system image that the device loads at startup.

Syntax

boot system {image-1 image-2}

Parameters

image-1— Specifies image 1 as the system startup image.

image-2— Specifies image 2 as the system startup image.

72

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

Page 88
Image 88
Intel SBCEGBESW10 CLI manual Sys, *.prv, image-1 and image-2 files cannot be deleted, Boot system image-1 image-2