Intel SBCEGBESW10 CLI manual Ip igmp snooping mrouter-time-out, Default value is 300 seconds

IGMP Snooping Commands

User Guidelines

The timeout should be at least greater than 2*query_interval+max_response_time of the IGMP router.

Example

The following example configures the host timeout to 300 seconds.

Console(config)# interface vlan 2

Console(config-if)#ip igmp snooping host-time-out 300

ip igmp snooping mrouter-time-out

The ip igmp snooping mrouter-time-outInterface Configuration (VLAN) mode command configures the mrouter-time-out. The ip igmp snooping mrouter-time-outInterface Configuration (VLAN) mode command is used for setting the aging-out time after multicast device ports are automatically learned. To restore the default configuration, use the no form of this command.

Syntax

ip igmp snooping mrouter-time-out time-outno ip igmp snooping mrouter-time-out

Parameters

•time-out— Specifies the Multicast device timeout in seconds (Range: 1-2147483647)

Default Configuration

The default value is 300 seconds.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

There are no user guidelines for this command.

114Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide