Address Table Commands

Parameters

lock — Saves the current dynamic MAC addresses associated with the port and disables learning, relearning and aging.

mac-addresses — Deletes the current dynamic MAC addresses associated with the port and learns up to the maximum number addresses allowed on the port. Relearning and aging are enabled.

Default Configuration

This setting is disabled.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

In this example, port security mode is set to dynamic for Ethernet interface 1.

Console(config)# interface ethernet ext.1

Console(config-if)#port security mode mac-addresses

port security routed secure-address

The port security routed secure-address Interface Configuration (Ethernet, port-channel) mode command adds a MAC-layer secure address to a routed port. Use the no form of this command to delete a MAC address.

Syntax

port security routed secure-address mac-address

no port security routed secure-address mac-address

Parameters

mac-address — A valid MAC address.

30

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

Page 46
Image 46
Intel SBCEGBESW10 CLI manual Port security routed secure-address, Mac-address a valid MAC address