Intel SBCEGBESW10 CLI manual Management ACL Commands, Management access-list

Management ACL Commands

13Management ACL Commands

management access-list

The management access-listGlobal Configuration mode command configures a management access list and enters the Management Access-list Configuration command mode. To delete an access list, use the no form of this command.

Syntax

management access-list name

no management access-list name

Parameters

•name — Access list name. (Range: 1-32 characters)

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

Use this command to configure a management access list. The command enters the Access-list Configuration mode, where permit and deny access rules are defined using the permit (Management) and deny (Management) commands.

If no match criteria are defined, the default is deny.

If you reenter an access list context, the new rules are entered at the end of the access list.

Use the management access-classcommand to select the active access list.

The active management list cannot be updated or removed.

Management ACL requires a valid management interface, which is a port, VLAN, or port- channnel with an IP address or console interface. Management ACL only restricts access to the device for management configuration or viewing.

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 145