Intel SBCEGBESW10 CLI manual Gvrp vlan-creation-forbid, Consoleconfig# interface ethernet ext.6

GVRP Commands

•timer_value — Timer values in milliseconds in multiples of 10. (Range: 10- 2147483640)

Default Configuration

Following are the default timer values:

•Join timer — 200 milliseconds

•Leave timer — 600 milliseconds

•Leavall timer — 10000 milliseconds

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

The following relationship must be maintained between the timers:

Leave time must be greater than or equal to three times the join time.

Leave-all time must be greater than the leave time.

Set the same GARP timer values on all Layer 2-connected devices. If the GARP timers are set differently on Layer 2-connected devices, the GARP application will not operate successfully.

Example

The following example sets the leave timer for Ethernet port 6 to 900 milliseconds.

Console(config)# interface ethernet ext.6

Console(config-if)# garp timer leave 900

gvrp vlan-creation-forbid

The gvrp vlan-creation-forbidInterface Configuration (Ethernet, port-channel) mode command disables dynamic VLAN creation or modification. To enable dynamic VLAN creation or modification, use the no form of this command.

Syntax

gvrp vlan-creation-forbid

no gvrp vlan-creation-forbid

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 105