Intel SBCEGBESW10 CLI Show ports storm-control interface, Console# show ports storm-control

Ethernet Configuration Commands

Example

The following example configures a port storm-control broadcast rate 4000 on port 2.

(config)# interface ethernet ext.2

Console(config-if)#port storm-control broadcast rate 4000

show ports storm-control

The show ports storm-controlPrivileged EXEC mode command displays the storm control configuration.

Syntax

show ports storm-control [interface]

Parameters

•interface — A valid Ethernet port. (Full syntax: unit/port)

Default Configuration

This command has no default configuration.

Command Modes

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the storm control configuration.

Console# show ports storm-control

Port	State	Rate [Kbits/Sec]	Included
----	-----	----------------	--------
1	Disabled	3500	Broadcast
2	Disabled	3500	Broadcast

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 101