Intel SBCEGBESW10 CLI manual Username, No enable password is defined, No user is defined

AAA Commands

Default Configuration

No enable password is defined.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example sets a local level 15 password called `secret' to control access to user and privilege levels.

Console(config)# enable password secret level 15

username

The username Global Configuration mode command creates a user account in the local database. To remove a user name, use the no form of this command.

Syntax

username name [password password] [level level] [encrypted]

no username name

Parameters

•name — The name of the user. (Range: 1-20 characters)

•password — The authentication password for the user. (Range: 1-159 characters)

•level — The user level (Range: 1-15). If a level is not specified, the level is automaically set to 1.

•encrypted — Encrypted password entered, copied from another device configuration.

Default Configuration

No user is defined.

18 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide