Address Table Commands

Command Modes

Interface Configuration (VLAN) mode

User Guidelines

Before defining forbidden ports, the multicast group should be registered.

Example

In this example, MAC address 0100.5e02.0203 is forbidden on port 2 within VLAN 8.

Console(config)# interface vlan 8

Console(config-if)# bridge multicast address 0100.5e.02.0203

Console(config-if)#bridge multicast forbidden address 0100.5e02.0203 add ethernet ext.2

bridge multicast forward-all

The bridge multicast forward-all Interface Configuration (VLAN) mode command enables forwarding all multicast packets on a port. To restore the default configuration, use the no form of this command.

Syntax

bridge multicast forward-all {add remove} {ethernet interface-list port-channel port- channel-number-list}

no bridge multicast forward-all

Parameters

add — Force forwarding all multicast packets.

remove — Do not force forwarding all multicast packets.

interface-list — Separate nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to designate a range of ports.

port-channel-number-list — Separates nonconsecutive port-channels with a comma and no spaces; a hyphen is used to designate a range of port-channels.

Default Configuration

This setting is disabled.

Command Mode

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

25

Page 41
Image 41
Intel SBCEGBESW10 CLI manual Bridge multicast forward-all, This setting is disabled Command Mode