Toshiba A40 manual Accessing the Setup Program, Boot Priority

3 Tests and Diagnostics 3.23 SETUP

3.23.2Accessing the SETUP Program

Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the SETUP screen. The SETUP screen is divided into two pages.

SYSTEM SETUP (1/2) ACPI BIOS version = X.XX

MEMORY

Total		= XXXXX KB
	SYSTEM DATE/TIME
Date(MM			XX-XXXX
	-DD-YY)	= XX-
Time(HH:MM:SS)		= XX:XX:XX
	BATTERY
Battery		= Full Power
	Save Mode

PASSWORD

Not Registered

BOOT PRIORITY

Boot Priority = HDD→FDD→CD-ROM→LAN

HDD Priority = Built-in HDD→PC Card

Network Boot Protocol = PXE

DISPLAY

Power On Display	= Auto-Selected
LCD Display Stretch	= Enabled
TV Type	= NTSC (US)

Others

Power-up mode	= Boot
CPU Cache	= Enabled
Level 2 Cache	= Enabled
Dynamic CPU Frequency Mode

=Dynamically Switchable Hyper-Threading Technology = Enabled

Auto Power On	=	Disabled
Panel Power On/Off	=	Disabled

↑↓→←: Select items Space, BkSp: Change values PgDn, PgUp: Change pages

Esc: Exit without saving Home : Set default values End: Save changes and Exit

SYSTEM SETUP (2/2) ACPI BIOS version = X.XX

CONFIGURATION

Device Config. = Setup by OS

PC CARD

Controller Mode = Auto-Selected

I/O PORTS

Parallel = LPT1(378H/IRQ7/CH3)

DRIVERS I/O

Built-in HDD

CD-ROM		= Primary IDE(1F0H/IRQ14)
		= Secondary IDE(170H/IRQ15)
	PCI BUS
PCI	BUS		= IRQ10, IRQ11

PERIPHERAL

Internal Pointing Device		= Enabled
Parallel Port Mode	= ECP
Hard Disk Mode	= Enhanced IDE(Normal)

LEGACY EMULATION

USB KB/Mouse Legacy Emulation

USB-FDD Legacy Emulation			= Enabled
			= Enabled
	PCI LAN
Built		= Enabled
	-in LAN

↑↓→←: Select items Space, BkSp: Change values PgDn, PgUp: Change pages

Esc: Exit without saving Home : Set default values End: Save changes and Exit

NOTE: Panel Power On/Off item appears only when the Power-up Mode is in Resume mode.

3-54 Satellite A40 Maintenance Manual (960-458)