Toshiba A40 4.13 Touch pad

4 Replacement Procedures 4.13 Touch pad
4.13 Touch pad
Removing the Touch pad
To remove the touch pad, follow the steps below and refer to figures 4-22.
1. Disconnect the touch pad flexible cable from the connector PJ3260 on the system
board.
2. Remove the following screws securing the touch pad.
• M2.5×3B S-FLAT HEAD screw ×2
3. Remove the touch pad.
M2.5
×
3B S-FLAT HEAD
T
ouch pad
T
ouch pad flexible cable
PJ3260
Figure 4-22 Removing the touch pad
4. Disconnect the touch pad flexible cable from the connector on the touch pad.
4-38 Satellite A40 Maintenance Manual (960-458)