3 Tests and Diagnostics

3.13 Expansion Test

Subtest 03 RGB monitor ID

Connect a wraparound connector to CRT monitor for the test of ID acquisition. To check whether the ID is acquired or not is judged by the data from the monitor. Therefore, this test will fail when it is performed in simultaneously display mode or panel display mode. Make sure the CRT used for this test is the one with ID and only the CRT is selected for display device before the test.

3-32

Satellite A40 Maintenance Manual (960-458)

Page 153
Image 153
Toshiba A40 manual Tests and Diagnostics Expansion Test