4.14 LED board

4 Replacement Procedures

Installing the LED board

The following describes the procedure for installing the LED board (See Figure 4-23).

1.Connect the LED cable to the LED board and to the connector PJ9500 on the system board.

NOTE: When connecting the LED cable, the bent portion of the cable must be connected to the connector on the LED board.

2. Fix the LED board to the system board with the following screw.

• M2.5⋅6B

FLAT HEAD screw

⋅1

Satellite A40 Maintenance Manual (960-458)

4-41

Page 250
Image 250
Toshiba A40 manual LED board Replacement Procedures, Installing the LED board