4 Replacement Procedures 4.10 Wireless LAN board/Modem Daughter Card
Installing the wireless LAN board
To install the wireless LAN board, follow the steps below and refer to figure 4-15 and 4-16.
1. Insert the wireless LAN board terminals slantwise into the connector on the
computer and press the wireless LAN board until it is securely in place.
2. Connect the wireless LAN cables (black and white) to the terminals on the wireless
LAN board and fix them with the glass tape.
3. Install the wireless LAN board cover and secure it with the following screw.
• M2×4Z BIND screw ×1
or
• M2×4 LH STICK screw ×1 (Athelos a/b/g)
4-30 Satellite A40 Maintenance Manual (960-458)