4 Replacement Procedures

4.14 LED board

4.14 LED board

Removing the LED board

The following describes the procedure for removing the LED board (See Figure 4-23).

1. Remove the following screw and LED board from the system board.

• M2.5⋅6B

FLAT HEAD screw

⋅1

2.Disconnect the LED cable from the connector PJ9500 on the system board.

3.Disconnect the LED cable from the LED board.

PJ9500

M2.56B FLAT HEAD

LED cable

LED board

Figure 4-23 Removing the LED board

4-40

Satellite A40 Maintenance Manual (960-458)

Page 249
Image 249
Toshiba A40 manual Replacement Procedures LED board, Removing the LED board