3 Tests and Diagnostics 3.23 SETUP
(b) HDD Priority
Use this option to set the priority for booting of the computer when a device
connected via PC card is connected to the computer.
Built-in HDD→PC Card: The computer looks for bootable files in the
built-in HDD first. (Default)
PC Card→Built-in HDD: The computer looks for bootable files in the PC
card first.
(c) Network Boot Protocol
Use this option to set the starting method via a network.
PXE Sets to PXE protocol. (Default)
RPL Sets to RPL protocol.
6. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
LED+AnalogRGB Selects both the internal LCD and the external CRT for
simultaneous display.
NOTE: When starting the computer in Resume mode, the last configuration is
remembered. If data does not appear on the display you are using after starting
in Resume mode, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external CRT, both the internal LCD and the external CRT and TV
display.
You cannot select TV display in HW Setup. To display on a TV screen, use
Fn+F5.
When an external CRT display which does not support SVGA mode is connected
and "LED+AnalogRGB"
is selected, the external display is not displayed.
3-60 Satellite A40 Maintenance Manual (960-458)