Toshiba A40 manual SUB-TEST Error Count

3 Tests and Diagnostics 3.2 Executing the Diagnostic Test

3.Select the test you want to execute and press Enter. When SYSTEM TEST is selected, the following message will appear:

SYSTEM TEST XXXXXXX

XXXDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end

[Ctrl]+[C] : key stop

SUB-TEST			: XX	ERROR COUNT		: XXXXX
PASS		COUNT : XXXXX
WRITE DATA : XX				READ DATA		: XX
ADDRESS			: XXXXXXSTATUS		: XXX
SUB-TEST			MENU :
01	-	ROM	checksum
02	–	Geyserville
03	-	Fan	ON/OFF
04	-
05	–	Quick charge
06	-
07	-	DMI	read
08	-	DMI	write
09	-	Thermister Check
99	-	Exit to DIAGNOSTIC TEST MENU

↑↓→←:		Select items
Enter	:	Specify
Esc	:	Exit

NOTE: The menu displayed by your computer may be slightly different from the one shown above.

4.Select the desired subtest number from the subtest menu and press Enter. The following message will appear:

TEST LOOP : YES/NO

Selecting YES increases the pass counter by one, each time the test cycle ends and restarts the test cycle.

Selecting NO returns to the subtest menu after the test is complete.

3-6 Satellite A40 Maintenance Manual (960-458)