3.2 Executing the Diagnostic Test

3 Tests and Diagnostics

5.The following message will appear:

ERROR STOP : YES/NO

Selecting YES stops the test program when an error is found and displays the operation guide on the right side of the display screen as shown below:

ERROR STATUS NAME

[[ HALT OPERATION ]]

1: Test end

2: Continue

3: Retry

These three selections have the following functions respectively:

[1]Terminates the test program and exits to the subtest menu.

[2]Continues the test.

[3]Restarts the test from the error.

Selecting NO keeps the test running even if an error is found.

Use ↑ or ↓ key to move a cursor of the “TEST LOOP” and “ERROR STOP”

6.Use the arrow keys to move the cursor to the desired option and press Enter.

Table 3-1 in section 3.3 describes the function of each test on the subtest menu. Table 3-2 in section 3.16 describes the error codes and error status for each error.

Satellite A40 Maintenance Manual (960-458)

3-7

Page 128
Image 128
Toshiba A40 manual Following message will appear