4 Replacement Procedures

4.26 Fluorescent lamp

4.26.7 Replacing the 15.0 Inch XGA Sharp Fluorescent lamp

Disassembling the 15.0 Inch XGA Sharp Fluorescent lamp

To disassemble the 15.0-inch XGA Sharp fluorescent lamp, follow the steps below and refer to figures 4-98 to 4-107.

1.Turn the LCD module face down, and remove the protection cover S (A), protection cover G (B), fixing tape (C) and fixing tape for lead wire (D).

NOTE: 1) Be careful not to damage the TCP or chips.

2) The protection cover G is reused. Discard the other tapes removed.

(A) Protection cover S

(C) Fixing tape

(D) Fixing tape for lead wire

(B) Protection cover G

Figure 4-98 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (1)

4-112

Satellite A40 Maintenance Manual (960-458)

Page 320
Image 320
Toshiba A40 manual Replacing 15.0 Inch Sharp fluorescent lamp XGA