Toshiba A40 manual Replacing 15.0 Inch LG.Philips fluorescent lamp XGA

4 Replacement Procedures 4.26 Fluorescent lamp

4.26.5 Replacing the 15.0 Inch XGA LG.Philips Fluorescent lamp

CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid contaminating or damaging the LCD panel. Be careful not to let dust or other foreign substance into the module.

Disassembling the 15.0 Inch XGA LG.Philips Fluorescent lamp

To disassemble the 15.0 inch XGA LG.Philips fluorescent lamp, follow the steps below and refer to figures 4-81 to 4-84.

1.Remove the outside tape and cover shield.

1)Remove the adhesive tape fixing the B/L wire. Be careful not to apply to the B/L wire.

2)Remove the cover shield (G). Be careful not to apply excessive force to the gate TCP.

3)Remove the cover shield (C). Be careful not to apply excessive force to the source PCB.

CUATION: Wear anti-static gloves to prevent circuit damage caused by ESC.

4)Remove the tape shield and adhesive tape fixing the top tape. Be careful not to apply excessive force to the top case.

Cover shield (C)

Cover shield (G)

Adhesive tape

Adhesive tape Tape shield

Figure 4-81 Replacing 15.0 Inch LG.Philips fluorescent lamp (XGA) (1)

4-98 Satellite A40 Maintenance Manual (960-458)