3.2 Executing the Diagnostic Test

3 Tests and Diagnostics

3.2Executing the Diagnostic Test

Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the DIAGNOSTIC TEST PROGRAM, follow these steps:

1.Insert the Diagnostics disk in the floppy disk drive and turn on the computer while pressing U key.

(The Diagnostics Disk contains the MS-DOS boot files.)

The following menu will appear:

1.Repair Main (T&D) 2.Repair initial config set

Enter a choice = 1

To execute Repair Main (T&D), select “1.Repair Main (T&D)” with ↑ or ↓ key and press Enter key.

To execute Repair initial config set, select “2.Repair initial config set” with ↑ or ↓ key and press Enter key.

The followings are described on the Repair Main (T&D). The Repair initial config set is described in section 3-24.

Satellite A40 Maintenance Manual (960-458)

3-3

Page 124
Image 124
Toshiba A40 manual Executing the Diagnostic Test Tests and Diagnostics