3.27 Sound/LAN/Modem Test Program 3 Tests and Diagnostics
Subtest 01 Microphoned recording & play
This subtest checks the function of the CODEC A/D D/A converter. Both the
microphone and headphone terminals can be checked at the same time.
Before executing this subtest, connect an external microphone to the
computer. If necessary, connect a headphone to the computer to check
whether the headphone jack of the computer is working properly.
When the subtest is selected, the following message appears:
....Press test number[1-4] ? pause
Press any key to continue...
....Press test number[1-4] ? call micrec
Record from source name is MIC
Requested Sampling Rate is 22025 Hz
Volume requested is 0,000dB
Record to buffer is BUFFER0
Record Time requested is 5.000 seconds
Actual record time will be 5.000
When the above message is displayed, the screen is fixed for a while. Then
record the sound with the microphone.
When the following message appears, make sure the recorded sound is
replayed.
Play to destination is LINEOUT
Volume requested is 0,000dB
Play from buffer name is BUFFER0
Requested play time is 5.000 seconds
Actual play time will be 5.000
Completing SoundMAX/ICH play buffer0 to line out
End time XXX XXX XX XX:XX:XX XXXX
System Status 0X0
Test completed at XXX XXX XX XX:XX:XX XXXX
System completion code was 0X0
NOTE: The menu displayed by your computer may be slightly different from the one
shown above.
Satellite A40 Maintenance Manual (960-458) 3-77