4 Replacement Procedures 4.26 Fluorescent lamp
4. Stick the out side tape and cover shield.
1) Install the tape shield and adhesive tape to fix the top case. Be careful not to
apply excessive force to the top case.
2) Install the cover shield (C). Be careful not to apply excessive force to the
control PCB.
CAUTION: Wear anti-static gloves to prevent circuit damage caused by ESC.
3) Install the cover shield (G). Be careful not to apply excessive force to the gate
TCP.
4) Stick the adhesive tape to fix the B/L wire. Be careful not to apply excessive
force to the B/L wire.
Cover shield (C)
Tape shield
A
dhesive tape
Cover shield (G)
A
dhesive tape
Figure 4-128 Replacing 15.0 Inch LG.Philips fluorescent lamp (SXGA+) (8)
4-132 Satellite A40 Maintenance Manual (960-458)