4 Replacement Procedures 4.26 Fluorescent lamp
Assembling the 15.0-inch XGA LG.Philips Fluorescent lamp
To assemble the 15.0-inch XGA LG.Philips fluorescent lamp, follow the steps below and
refer to figures 4-85 to 4-88.
1. Install the cover assembly bottom (L), sheets, light guide, adhesive tape and board
assembly.
1) Remove the protect film from the cover assembly bottom (L).
2) Secure the cover assembly bottom (L) with the two screws.
NOTE: Maximum value of torque is 2.0kg
cm.
3) Install the light guide and sheets. (Secure the reflection sheets with double-
sided tape.)
NOTE: No penetration of foreign object is indispensable not to scratch the surface of the
sheets.
4) Stick the adhesive tape to fix the sheets.
5) Install the board assembly. (Secure the gate PCB with double-sided tape.)
4-102 Satellite A40 Maintenance Manual (960-458)