P100IH ISDN Router
11.4 Backup Configuration
Option 5 from Menu 24 - System Maintenance allows you to backup the current Prestige configuration to your workstation. Backup is highly recommended once your Prestige is functioning properly.
You must perform the backup and restore through the console port. Any serial communications program should work fine; however, you must use XMODEM protocol to perform the download/upload.
Please note that terms “download” and “upload” are relative to the workstation. Download means to transfer from another machine to the workstation, while upload means from your workstation to another machine.
Step 1. Go to Menu 24.5 (shown next).
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
Figure 11-11 Backup Configuration
Step 2. Press “Y” to indicate that you want to continue.
The following procedure is for the HyperTerminal program. The procedure for other serial communications programs should be similar. Run the HyperTerminal program.
Step 1. Click “Transfer”, then “Receive File” to display the following screen
Enter where you want to place the rom configuration file on your computer.
Choose the
.
Figure 11-12 HyperTerminal Screen
Step 2. Enter a path and name for the rom configuration file on your computer (see section 2.7 Filename conventions) and make sure you choose the
Step 3. After a successful backup you will see the following screen. Press any key to return to the SMT menu.
System Maintenance |
