P100IH ISDN Router
| Field | Description | Option |
|
|
|
|
|
|
|
| one will be advanced one rule. Save Set means to |
|
|
|
| save the whole set (note when you choose this action, |
|
|
|
| the Select Rule item will be disabled). |
|
|
| Select Rule | When you choose Edit, Insert Before or Delete in the | 1 |
|
|
| previous field the cursor jumps to this field to allow you |
|
|
|
| to select the rule to apply the action in question. |
|
|
|
|
|
|
|
N.B.: Save Set in the Action field means to save the whole set. You must do this if you make any changes to the set – including deleting a rule. No changes to the set take place until this action is taken.
Be careful when ordering your rules as each rule is executed in turn beginning from
rule 1.
Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 - Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and Global Start/End IPs displayed in Menu 15.1.1.
Menu 15.1.1.1 - Marc - Rule 1
Type=
Local IP:
Start= 0.0.0.0
End = 255.255.255.255
Global IP:
Start= 0.0.0.0
End = N/A
Server Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Figure 4-10 Editing The First Rule in a Set
NAT |
